2019年June

We will introduce a reliable buddy, water content measuring instrument Infrared thermo camera, hydropath probe, and this water content measuring instrument that I got for around 20,000 yen This page of three divine instruments of rain leak investigation Language This page was automatically translated. Please note that it may differ from the original content.

An infrared thermography camera is a device that visualizes the amount of heat emitted from a substance using a seven-color rainbow carer. Infrared rays are emitted from all materials with temperature and are proportional to the square of the actual material's temperature. If the surface of the substance is 6 degrees, it will be 1296 degrees, if it is 7 degrees, it will be 2401 degrees, so a subtle temperature difference is displayed as a big difference. It may be a little difficult, but it is possible to use this temperature difference to find areas where moisture remains or are cavities. Language This page has been translated automatically. Please note that it may differ from the original content.

About infrared thermography cameras In the survey conducted by our company, we use infrared thermographic cameras, but we will tell you that they cannot be used undying conditions. It is a subject that is not good at keeping the shooting distance, temperature 5 ° C or more, wind speed 5 m or less, close-up angle 45 degrees or more, there is a difference in temperature on the surface, etc. Unfortunately, the finish of concrete release is not a universal infrared thermography camera Actually, the main body price is wide from 30,000 yen to 5 million yen depending on the resolution, and you can understand it depending on the survey contents. Our cameras are intermediate, but we use cameras that perform well enough to investigate leaks and floating peeling of finishing materials. I have purchased a camera of less than 1 million yen in the past, but unfortunately it could not be used for building-related research Language This page was automatically translated. Please note that it may differ from the original content.

Hydropass (HIPS) survey started! The long-wished rover has been completed. (Patented) Hydro = Water Path = Road It is an exploration device that searches for water supply (Mizu michi). If the position and range of large-sized images can be identified with infrared thermography camera, the inlet of rainwater can be pinpointed with HIPS, so the investigation time is shortened, of course, but the specific establishment of the deterioration site is almost 100%. We will tell you how this HIPS works at a later date. Language This page has been translated automatically. Please note that it may differ from the original content.

Request for rain leak investigation from a telecommunications equipment supplier We conduct a pre-investigation before this survey. In the prior investigation of this case, the cause of the rain leak could not be determined in the construction range of the requester. However, in reality, rain leaks have occurred, and when we investigated, we found that multiple rainwater infiltrated. Before installing communication equipment or solar panels on roofs and rooftops, it is recommended to check whether there is a leak. Language This page has been translated automatically. Please note that it may differ from the original content.

Conducted a rain leak investigation at the request of the condominium owner As a result of the investigation, a leak occurred in the room on the top floor, and as a result of the investigation, countless cracks have occurred as in the specific image that the diagonal wall on the top floor of the north side of the building is the cause. An oblique wall is a wall cut diagonally to clear the diagonal limit by building standards method, but is this part really a wall? Is it a roof? The part name is a wall, but construction is a roof, but in order to emphasize design and reduce construction costs, the diagonal wall that is often built by the same construction method as the wall Is different from the wall standing vertically, the diagonal wall with a long rainwater retention time progresses quickly and there are very many rain leaks caused by the deterioration of the oblique wall. Language This page has been translated automatically. Please note that it may differ from the original content.

Request for rain leak investigation from a food manufacturer Rain leak occurs directly under the skylight installed on the roof No matter how many times it is repaired, it will not improve, so I want you to do something! There are no cracks or cracks in the glass, there is no leakage to the lower floor even if there is no problem with caulking, and apparently it leaks due to rain on windy days The most common cause in the rain leak investigation is air flow, pressure, wind pressure When nature is caused by weather beyond the scope of human imagination, this case went to repair work and was able to stop the leak. Language This page has been translated automatically. Please note that it may differ from the original content.

We conducted a rain leak investigation at the request of a real estate rental company It was a four-story S-built ALC, but it was due to the deterioration of the caulking applied to the shrinkage site in each hierarchy. Since the ALC panel is fired concrete (alkaline), when touched by rain that is acidic, neutralization progresses and the panel becomes vulnerable. In addition, cawking at the end of the panel cannot demonstrate performance if it is cured with light years even if there is no problem visually, and rainwater infiltrates from thin parts of the coating film and hair fine cracks. I want you to check the cawing at the maintenance time such as exterior wall painting. Language This page has been translated automatically. Please note that it may differ from the original content.

At the request of the renovation company, we will conduct a rain leak investigation. The cause of the leak from the first floor sash was unknown. As a result of the investigation, it turns out that the left-hand official material applied to the finish of the outer wall is insufficient, and when using a material with a low water repellent effect, it is very important to construct it with a coating thickness that is more than the specified. Language This page has been translated automatically. Please note that it may differ from the original content.

We would like to express our sincere gratitude for your continued support. This time, we have renewed our website. We will strive to further enhance the content, so we look forward to your continued support. Language This page has been automatically translated. Please note that it may differ from the original contents.